|
Vibro Feeder
DMP vibro feeders
are used for controlling the flow of material from feed hoppers to the
vibrating screen, using twin unbalanced vibro motors.
Construction
Heavy duty vibratory feeder have welded construction, which transmits
vibrations without fatigue. They are built for continuous operation.
Each feeder utilizes the forces set up by two synchronized,
counter-rotating, heavy-duty, unbalanced Vibratory Motors, which are
firmly fixed to the Feeder trough, in a specific angle to the feeding
level. Feeders with unbalanced drives, vibrate freely on a support
spring which is insulated against vibration transmission to base frame.
This result in a straight line, push-pull, -linear, oscillating motion.
The fact that the motors are synchronized and in balance with one
another, eliminate the isolation problems normally associated with
simple brute force single eccentric drives systems.
Unbalanced Motor drives are economical conveying means for all bulk
materials. They are used where products are to be fed either
continuously or in batches, as, for instance.
- Discharging bulk materials from bins.
- Feeding crushers, mixers, furnaces and scales.
- Feeding conveyor-belts, bucket-elevators and vibratory screens, Loading and sorting plants.
Compared with other conveying means vibratory feeders have low energy
consumption and cause little pollution. They are wear resistant and
thus do not influence the quality and character of the product they
handle.
Adjusting the Feed Rates:
The resultant
force output, amplitude final product conveying speed is readily
adjustable on all Feeders. Percentage settings are marked on the shaft
of each motor. Loosening one bolt on the outer eccentric weight enables
the eccentricity to be adjusted to the desired percentage of maximum
force available.
Capacity range: from 50 TPH to 500TPH.
Pan Sizes: 0.15 M3 to 3.5 M3.
Unbalance Vibro Motors: 0.5 HP to 10 HP.
|
